Ask X3What does 49 CFR 180.205 (General requirements for requalification of specification cylinders) require?
Generated guidance. Confirm the source and its applicability before you act. How we check sources.
Short answer
To meet the requirements of 49 CFR 180.205, the following are required:
1. Each cylinder used for the transportation of hazardous materials must be an authorized packaging and conform to the applicable requirements.
2. Persons performing requalification functions must hold a current approval issued under the procedural requirements prescribed in subpart I of part 107 of this chapter.
3. Each cylinder bearing a DOT, CRC, BTC, or CTC specification marking must be requalified and marked as specified in the requalification table in 180.209(a) or requalified and marked by a facility registered by Transport Canada.
The rule says
A cylinder may not be filled with a hazardous material and offered for transportation in commerce unless that cylinder has been successfully requalified and marked in accordance with this subpart — 49 CFR 180.205(c).
"No person may represent that a repair or requalification of a cylinder has been performed in accordance with the requirements in this subchapter unless that person holds a current approval issued under the procedural requirements prescribed in subpart I of part 107 of this chapter." (49 CFR 180.205(b))
"Each cylinder bearing a DOT, CRC, BTC, or CTC specification marking must be requalified and marked as specified in the requalification table in 180.209(a) or requalified and marked by a facility registered by Transport Canada in accordance with the Transport Canada TDG Regulations." (49 CFR 180.205(c))
In plain English
The regulation requires that cylinders used for transporting hazardous materials be properly requalified and marked to ensure safety. This involves meeting specific requirements, such as holding current approvals for requalification functions and following the requalification table or Transport Canada's TDG Regulations for marking. In practice, this means that cylinders must be regularly inspected and tested to ensure they can safely contain hazardous materials during transportation. Failure to comply with these requirements can result in a cylinder being deemed unfit for use, posing a risk to people and the environment.
What to do
- Ensure all cylinders used for hazardous materials transportation are properly requalified and marked according to 49 CFR 180.205 and 180.209.
- Verify that personnel performing requalification functions hold the necessary current approvals.
- Maintain accurate records of requalification and marking as required by 49 CFR 180.215.