Ask X3What does 49 CFR 107.805 (Approval of cylinder and pressure receptacle requalifiers) require?
Generated guidance. Confirm the source and its applicability before you act. How we check sources.
According to 49 CFR 107.805, to be approved to inspect, test, certify, repair, or rebuild a cylinder or UN pressure receptacle (under specific DOT, UN, special permit, or TDG/TC specifications), you must meet the following requirements:
* Independent Inspection Agency Review: You must arrange and pay for an approved independent inspection agency to review your inspection or requalification operation.
* Application Submission: If the independent inspection agency's inspection has satisfactory results, you must submit an application containing:
* A letter of recommendation from the independent inspection agency.
* An inspection report.
* The information required by § 107.705(a).
* The name of the facility manager.
* The types of cylinders or pressure receptacles that will be handled at the facility.
* A certification that your facility will operate in compliance with applicable requirements of subchapter C.
* The signature of the person making the certification and the date signed.
* For mobile unit operations, details on the equipment, specific vehicles, geographic operating area, and any differences from a standard facility operation.
* Reporting Changes: If you hold a current Requalifier Identification Number (RIN), you must report any changes in your name, address, ownership, testing equipment, or management/personnel performing these functions in writing to the Associate Administrator (PHH-32) within 20 days of the change.