What does 49 CFR 178.33a (Specification 2Q; inner nonrefillable metal receptacles) require?

Short answer

49 CFR 178.33a requires inner nonrefillable metal receptacles to meet specific standards.

1. The section does not provide detailed requirements.

2. It references Specification 2Q.

3. Other sections, such as 49 CFR 178.33d, provide variations for these receptacles.

The rule says

"178.33a Specification 2Q; inner nonrefillable metal receptacles." (49 CFR 178.33a)

In plain English

The regulation for inner nonrefillable metal receptacles is outlined in 49 CFR 178.33a, which refers to Specification 2Q. This means that any packaging or container designed as an inner nonrefillable metal receptacle must adhere to the standards and specifications detailed under this designation. However, the specifics of these requirements are not detailed in this section itself but are implied to be part of the broader standards for packaging hazardous materials. In practice, this means that manufacturers and users of such receptacles must ensure they meet the prescribed requirements, which could include material thickness, construction, and testing standards to ensure safety during transport.

What to do

• Refer to the detailed specifications under Specification 2Q for design and construction requirements.
• Ensure all inner nonrefillable metal receptacles are tested and certified to meet the standards outlined in 49 CFR 178.33a and its referenced specifications.
• Consult 49 CFR 178.33d for variations in specifications that may apply to specific types of inner nonrefillable metal receptacles.
• Verify that the receptacles are properly marked and documented to show compliance with the relevant regulations.