Ask X3What does 49 CFR 178.1010 (Marking of Flexible Bulk Containers) require?
Generated guidance. Confirm the source and its applicability before you act. How we check sources.
According to 49 CFR 178.1010, the manufacturer must mark every Flexible Bulk Container in a durable and clearly visible manner. The marking can be in a single line or multiple lines, but must follow this exact sequence of required information:
1. The United Nations packaging symbol (with exceptions noted in § 178.503(e)(1)(ii)).
2. The code number designating the Flexible Bulk Container design type, followed by the letter "W" if it differs from subpart R requirements or uses alternative testing approved by the Associate Administrator.
3. The capital letter "Z" to show it meets the Packing Group III performance standard.
4. The month (numerically) and year (last two digits) of manufacture.
5. The country authorizing the mark (use "USA" for containers manufactured and marked in the United States).
6. The name, address, or registered symbol of the manufacturer or the approval agency certifying compliance.
7. The stacking test load in kilograms (kg), or "0" if the container is not designed for stacking.
8. The maximum permissible gross mass in kg.